Tire is from xceed.
On top is 2 mm each side moved.
On bottom is std position of 12R5/12R5.1 chassis, 2mm spacer on wheel axle.
At least 165mm wide, usually I prefer on front 169-170mm, rear end 172mm.
środa, 12 czerwca 2013
The power of 3D t-flex cad and my idea of 1/12th pan car front end ;)
How to put 1/12 sanwa servo between two asso 12R5 front end blocks.
Tire is from xceed.
On top is 2 mm each side moved.
On bottom is std position of 12R5/12R5.1 chassis, 2mm spacer on wheel axle.
At least 165mm wide, usually I prefer on front 169-170mm, rear end 172mm.
Tire is from xceed.
On top is 2 mm each side moved.
On bottom is std position of 12R5/12R5.1 chassis, 2mm spacer on wheel axle.
At least 165mm wide, usually I prefer on front 169-170mm, rear end 172mm.
Subskrybuj:
Komentarze do posta (Atom)
Brak komentarzy:
Prześlij komentarz